Change a Propane Tank
Propane fueled forklifts are commonly utilized in warehouses. The lift truck is designed with the propane tank mounted behind the operator. The tanks, that look a lot like beer kegs, need to be replaced from time to time because they have a limited lifespan. Forklift drivers should utilize care when handling propane tanks. Compressed gases are dangerous, particularly since the gas is flammable. Always utilize care when replacing and removing propane tank to avoid being injured.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn off the tank valve. The forklift should be left on until the engine dies. This procedure burns the gas off in the transfer hose which connects the engine and the tank. Prior to taking the next steps, put on the proper safety equipment, such as insulated gloves made of either neoprene or leather. It is really important for you to protect your skin from touching the compressed gas, which is very cold.
2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When putting in a new tank, tighten the nut to reattach the holding straps and to reattach the hose at the valve of the tank.
3 Leaks can be checked just by applying soapy water to the valve and opening it slightly. If there is a leak, it would cause bubbles to foam from around the valve. If this occurs, inspect the connection hose at the nut and the valve area. Re-tighten the connecting nut if you detect any leaks around the area of the valve, and after that perform the leak inspection process once more. Persistent leaks mean that both the nut and connecting hose must be replaced. Nevertheless, if replacing the nut and hose still does not stop the leak, the tank should be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. Afterward you can start the forklift and resume working.