Nearly all of the time, companies would spend lots of money to purchase their forklifts. It is vital, therefore to take proper care of your equipment to protect your investment into the long run. It is really a great idea to know the procedures that are undertaken during the maintenance and care of this piece of machine.
Among the best ways to tell how good the engine is working is by starting the lift truck up and listening closely to see how it works. Like for instance, if there are any misses or knocks, the machinery is defective and this should raise several concerns. Also listen closely for any squealing noise that come from the belts since these noises will provide you with a wealth of information.
Several of the main parts needing attention during maintenance comprise the gauges, horn, safety warning devices, the lights and the overhead guard. Any burnt out light bulbs or faulty components have to be replaced as soon as they are noticed. It is also vital to inspect the wiring.
When the above components have been checked thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Every battery cell should be checked in order to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and then change the filters. The transmission filter, fuel filters and the hydraulic filter have to be frequently replaced. Before fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
Once the oil change has been completed and new filters have been fitted, visually check the drive axle from beneath the machinery. Be sure to grease the axle if there is any grease fitting. Check the engine belts for any cracks or frays. If you find any, fix the problem accordingly. Afterwards, inspect every other part of the equipment like the wheels. If any kind of fault or concern is detected, be sure to deal with it immediately so as to make certain the machinery is running at its safest and optimum levels.