Reach Forklifts
In nearly all distribution centers or warehouse environments, overall space is usually limited. If you could get a machine to use in smaller spaces and aisles, the more storage space a company will be able manage. Hence, specialized machine has been designed for operating in very narrow aisles so that space and efficiency could be maximized.
Reach Trucks
The specific reach forklift has a mast which extends away from the body of the forklift. Normally, it is attached with a scissor mechanism. When the scissor is compacted or drawn in, the forklift becomes a lot narrower that the typical forklift.
Operator Position
Reach trucks are designed so the operator can stand while in operation of the equipment. This is a contrast to the regular forklift where the operator is usually sitting. The standing operation area reduces the amount of room needed for the operator compartment, allowing the machine to accomplish an even smaller profile overall.
Space Saving
Aisle-ways can be made as narrow as 7 feet with a reach truck. Most regular lift trucks need a minimum aisle space of about 11 feet; therefore, using a reach truck gives roughly a savings of 5 feet per aisle. When renting a warehouse on a square foot basis, this is a significant amount of space.
Unique Controls
A reach truck is usually steered using a rotating lever which is situated on a platform beside the driver. There is another lever utilized to control the mast and for extending the mast and also to control reverse and forward. These controls are quite different compared to typical forklift controls.
Load Capacity
Usually, the reach truck's load capacity is less than that of a standard lift truck, depending on the model. This is largely because of the machine's narrow design, that could result in a really high center of gravity. When the mast is extended fully and the load is lifted, this is actually true.